Recessed lighting can add both function and style to your home. It’s a popular choice for kitchens, living rooms and bedrooms, and can even be used to highlight artwork or architectural features. And, when installed properly, recessed lighting can give your home a polished, finished look.
Whether you’re planning a new installation or retrofitting an existing space, here are some tips on how to install recessed lighting.
Step 1: Choose your location
The first step is to decide where you want your recessed lights to go. Keep in mind that recessed lighting is best used to accentuate a particular feature or area, so think about what you want to highlight.
In the kitchen, for example, recessed lighting can be used to illuminate countertops or create a cozy breakfast nook. In the living room, it can be used to highlight artwork or provide ambient lighting. And in the bedroom, electrical contractors in Coeur d’Alene, ID can be used to create a relaxing reading nook or provide task lighting next to the bed. Once you’ve decided where you want your recessed lights to go, the next step is to determine the spacing.
Step 2: Determine the spacing
The spacing of your recessed lights will depend on the size of the area you’re lighting and the type of light bulbs you’re using.
As a general rule of thumb, you should space your recessed lights about 4 to 6 feet apart. But if you’re using larger light bulbs, you may want to space them further apart.
Step 3: Mark the ceiling
Once you’ve determined the spacing of your recessed lights, the next step is to mark the ceiling.
To do this, you’ll need a measuring tape, a level and a pencil. First, measure the distance between the two marks you made in Step 2. Then, use the level to draw a horizontal line between the marks. This will be your reference line for installing the recessed lights.
Step 4: Cut the holes
The next step is to cut the holes for your recessed lights. To do this, you’ll need a drywall saw.
Start by drilling a pilot hole at each of the marks you made in Step 3. Then, use the drywall saw to cut out the holes for your recessed lights.
Step 5: Install the housing
Once you’ve cut the holes for your recessed lights, the next step is to install the housing.
To do this, you’ll need a screwdriver and a stepladder. First, hold the housing up to the hole and use the screwdriver to secure it in place. Then, use the stepladder to reach the housing and screw it into the ceiling.